Vintage Decoration Items

A                 
Air filters in copper
Angle valves

All following armatures are made of bronze or brass, partly with copper:

Armatures (big taps)
Armatures (tank armatures)
Armatures (overpressure)
Armatures (water cocks)
Armatures (mixing armatures)
Armatures (yeast plugs)
Armatures (fittings)
Armatures (angle valves)
Armatures (tapping cocks)
G
Grist mill
Gauging rods
N
U/V/W
Water cocks
Weights and plugs
Wort aeration
B
Barrels (miniature)
Barrel punch
Barrel pitch equipment
Beer Wörgel (pump)
Blending Apparatus 
Burning Iron
Brewery tools
Brewpanhood doors
H
Hand wheels
Hop back
Hop vessel
Hose connectors
O
Overpressure armatures
X/Y/Z
Yeast plugs
C
Calculator
Capsule presser
Chains
Clock (from brewhouse)
Cooking caldron in copper
I/J P/Q
Plough
Plug cocks
Plug taps in  bronze/brass
Pumps for decoration

 
D
Dosage unit
K
Kieselguhr filter
R
 
E

L
Lanterns

Ladder holder
Lids for pipes
S
Sample taker for mash/wort
Sight lanters for tubes
Single parts
Signs / Wall decoration
Sieve ring copper-brass
Square wrenches
Sprayhead for barrels
Star wheels from old fillers
 
F                            
False bottom in brass
Feeders
Filter housings
Filters (Sheet + Kieselguhr)
Fillers
Fillers (parts)
Fittings
M
Malt wagon
Malt inlet supply
Mixing station
Multitube Condenser
T
Tapping cocks
Tank armatures

Tank aeration armatures
Temperature recorder
Thermometer
Tube bunging apparatus
 

Back to the decoration selection

    â Complete listing see below   â


1 Water mixing station, spherical, material bronze/brass

1 Water mixing station in bronze

No. Length total Weight Location
1 54 cm 6,2 kg Box 102
2 54 cm 8,3 kg Box 102
3 24 cm 3,6 kg Box 102
6 34 cm 11,5 kg on top wooden shelf

Back to the top


Old two- or three-way-cocks in copper or brass

Internal no. 2- or 3-way Supplies DN Size LxWxH in mm Weight circle / holes full size in mm Photos
1g 3-way 2 x Fl DN 70 / 1 x G DN 100 265 x 340 x 296  30,0 kg 140 / 4 265 x 130 Photo
2g 2-way 2 x Fl DN 80 265 x 200 x 480 30,0 kg 160 / 4 265 Photo
3g 3-way 3 x Fl DN 50 280 x 220 x 385 31,0 kg 135 / 4 385 x 125 Photo
4g 2-way 2 x G DN 80 300 x 260 x 740 31,0 kg - 280 Photo
5g 3-way 3 x Fl DN 125 443 x 240 x 540 76,5 kg 200 443 x 145 Photo
6g 2-way 2 x Fl DN 100 325 x 460 x 370 61,0 kg 180 325 Photo
7g 3-way 3 x Fl DN 80 265 x 240 x 350 44,0 kg 160 / 4 265 x 140 Photo
8g 3-way 3 x Fl DN 65 240 x 220 x 340 33,0 kg 145 / 4 240 x 125 Photo
9g 2-way 2 x Fl DN 50 200 x 164 x 285 20,0 kg 125 / 4 200 Photo
10g 2-way 2 x Fl DN 50 190 x 180 x 250 13,0 kg 140 / 6 190 Photo
12g 3-way 3 x Fl DN 100 320 x 270 x 390 64,2 kg 180 / 8 320 x 160 Photo
13g 2-way 2 x Fl DN 125 375 x 330 x 450 93,2 kg 210 / 8 375 Photo
14g exchange 70 mm 370 x 300 x 180  20,3 kg n.a. n.a. Photo
15g 3-way 70 mm 500 x 270 x 300 24,4 kg n.a. n.a. Photo
16g 3-way DN 80 flange 270 x 270 x 305 31,8 kg n.a. n.a. Photo
17g 3-way DN 80 flange 255 x 255 x 305 27,6 kg n.a. n.a. Photo
18g going through DN 80 flange 300 x 180 x 335 22,8 kg n.a. n.a. Photo

Several tank outlet armatures, 3-way-cocks and sample cocks in bronze/brass

Click here for complete listing with photos


Several overpressure armatures in bronze/brass

Click here for complete listing (German) with photos


Several angle valves for no. 1 - 16 in brass or bronze


Several water cocks no. 1 - 39 in brass or bronze


Several connections/fittings in bronze/brass


1 Temperature recorder for brew pans

1 Temperature recorder old in steel/brass

1 Temperature recorder for brewpans, with thermometer (without function),
for wall mounting

1 Temperature recorder for brew pans

Back to the top


1 Multitube Condenser

Back to the top


6 Tube bunging apparatus with 4 tubes

1 Tube bunging apparatus alu-glass with 4 glass tubes (2 tubes broken)

Back to the top


1 feeder make Schenk

1 feeder with 2 acrylic glass cylinders

Back to the top


1 Bottle filler longtube

Several Kegfiller organs in brass / stainless steel / cast 
(medium-touching parts in stainless steel)

Back to the top


Several hand wheels of a brewhouse (partly with standing feet or waves)

Internal no. Diameter or length Weight Photos
1 25 cm / L = 21 cm 8,3 kg  
2 27 cm / L = 77 cm 10,8 kg Photo 1 - 3
3 27 cm / L = 75 cm 9,5 kg  
5 15,5 cm please ask  
6 15,5 cm please ask Photo 4 - 9
7 13 cm please ask  
8 15 cm please ask  
11 23 cm 4,8 kg  
13 22 cm 3,2 kg Photo 10 - 21
19 22,5 cm 1,9 kg  
20 23 cm 1,3 kg  
21 19,5 cm 10,1 kg  

Several brewpanhood-doors

1 door in copper, with brass attachments, wide 3 doors in copper with brass attachments 1 door in copper with brass attachments, small

Back to the top


2 Filter endcheeks make Schenk

Back to the top


1 Lantern in brass from beer filter

1 Filter lantern in bronze

1 Blending apparatus lantern in bronze

2 Blending apparatus lanterns in brass
(not available at the moment)

Back to the top


1 Blending apparatus with 2 lanters

Back to the top


1 Blending apparatus brass/copper on moveable steel frame

Back to the top


1 Calculator

Back to the top


2 EK-Sheetfilter - frame aluminium/steel, with plastic plates

Back to the top


1 Filter housing (air-/coalfilter) in bronze/copper

1 Air filter housing in copper/bronze with inlet in copper/bronze empty

1 Air filter housing in copper/bronze (empty, without coal)

1 Aktive coal filter copper-brass

Back to the top


Old brewery tools  

Back to the top


Burning irons (numbers) for marking of wooden barrels

Burning irons (letters) for marking of wooden barrels

Several burning irons (logos) for marking of wooden barrels

1 electrical burning iron with wooden handle and logo, but at the moment without cable


1 Barrel punch (very old manual tool to make holes into wooden barrels - not restored yet)

Back to the top


OId bunging hole tools for wooden barrels

Back to the top


2 Brewpan thermometers in brass

Back to the top


1 wooden winch, old

Back to the top


1 Wort aeration in brass with feet in steel

Back to the top


1 Paper press (was last used to cut into labels)

Back to the top


1 Two-Rolls-Grist mill

Back to the top


1 manual natural corker, with hand lever

Back to the top


1 Inflow dosage unit make Schenk complete with armatures

1 Inflow dosage unit with acrylic glass cylinder

1 Inflow dosage unit with acrylic glass cylinder


2 Ladder holders for brewpans in bronze


1 Hop sieve ("Hopfenseiher"), moveable


4 gauging rods for brewpans


Several thermometers and pressure meters for brew pans in brass

1 item thermometer with capillary pipe and insertable sensor 1"

1 Pressure meter with pressure meter box

3 thermometers for brewhouse (2 x with capillary pipe (in working condition) + holder
                                                      for pan or lauter tun /
                                                      1 x without capillary pipe (without function) - from pre-heater

1 thermometer make Huppmann from pre-heater

1 thermometer from brewpan

Back to the top


1 moveable Schenk kieselguhr filter 40x40


1 old plough (as on photo)


Several tapping cocks in brass or bronze in different sizes

No. Item Length Weight Photo
4 tapping cock in brass 158 mm 0,85 kg Foto Nr. 1 - 31
6 tapping cock in brass 183 mm 0,7 kg Foto Nr. 1 - 31
7 tapping cock in brass 228 mm 0,75 kg Foto Nr. 1 - 31
8 tapping cock in brass 208 mm 0,9 kg Foto Nr. 1 - 31
15 tapping cock in brass 219 mm 0,85 kg Foto Nr. 1 - 31
16 tapping cock in brass 219 mm 0,9 kg Foto Nr. 1 - 31
17 tapping cock in brass 219 mm 0,87 kg Foto Nr. 1 - 31
21 tapping cock in brass 228 mm 0,8 kg Foto Nr. 1 - 31
22 tapping cock in brass 197 mm 1,1 kg Foto Nr. 1 - 31
23 tapping cock in brass 192 mm 1,1 kg Foto Nr. 1 - 31
24 tapping cock in brass 198 mm 1,1 kg Foto Nr. 1 - 31
26 tapping cock in brass 128 mm 0,68 kg Foto Nr. 1 - 31
27 Pipe 100 mm 0,1 kg Foto Nr. 1 - 31
28 Pipe 120 mm 0,2 kg Foto Nr. 1 - 31
29 Pipe 116 mm 0,2 kg Foto Nr. 1 - 31
30 Pipe 110 mm 0,15 kg Foto Nr. 1 - 31
31 Pipe 121 mm 0,17 kg Foto Nr. 1 - 31
33 Pipe 110 mm 0,15 kg Foto Nr. 33 - 48
34 Pipe 120 mm 0,13 kg Foto Nr. 33 - 48
35 Pipe 109 mm 0,11 kg Foto Nr. 33 - 48
36 Pipe 111 mm 0,32 kg Foto Nr. 33 - 48
37 Pipe 111 mm 0,4 kg Foto Nr. 33 - 48
38 tapping cock in brass 200 mm 0,85 kg Foto Nr. 33 - 48
39 tapping cock in brass 202 mm 0,85 kg Foto Nr. 33 - 48
40 tapping cock in brass 202 mm 0,85 kg Foto Nr. 33 - 48
42 tapping cock in brass 200 mm 0,88 kg Foto Nr. 33 - 48
43 tapping cock in brass 200 mm 0,88 kg Foto Nr. 33 - 48
44 tapping cock in brass 237 mm 1,32 kg Foto Nr. 33 - 48
45 tapping cock in brass 315 mm 2,1 kg Foto Nr. 33 - 48
47 tapping cock in brass 318 mm 2,1 kg Foto Nr. 33 - 48
49 Pipe 120 mm 0,5 kg Foto Nr. 49 - 57
50 Pipe (screw missing) 115 mm 0,19 kg Foto Nr. 49 - 57
51 Pipe 150 mm 0,55 kg Foto Nr. 49 - 57
52 Pipe (screw missing) 145 mm 0,38 kg Foto Nr. 49 - 57
55 tapping cock in brass
(washer and screw missing)
230 mm 0,9 kg Foto Nr. 49 - 57
56 tapping cock in brass 230 mm 1,2 kg Foto Nr. 49 - 57
57 tapping cock in brass 230 mm 1,2 kg Foto Nr. 49 - 57

1 Spray head for barrels

1 Spray head for barrels in cast iron


Several star wheels and related parts in bronze/brass for old fillers

No. Diameter or length Weight Miscellaneous
1 29 cm 10,1 kg Star
2 26 cm 7,2 kg Star
3 25 cm 8,0 kg Star
4 26 cm 8,2 kg Star
5 25 cm 9,5 kg Star
6 18 cm 4,3 kg Star
7 a + b 27 cm 4,5 kg Star
8 a + b 27 cm 2,6 kg Star
9 L = 62 cm 12,5 kg Worm
10 11 cm 1,7 kg Star
11 L = 28 cm 7,9 kg Middle piece

Sight lanterns for tubes and armatures with glass

No. Length total Weight
1 60 cm 10 kg
2 40 cm 7,7 kg
3 51 cm 10,9 kg
4 32 cm 8,4 kg
5 56 cm 16,4 kg
6 27 cm 4,6 kg
7 21 cm 2,1 kg
8 26 cm 3,5 kg

Tapping rod

No. Length total Weight
1 89 cm 3,9 kg
2 138 cm 3,1 kg

Several tank aeration armatures


Several small cocks and small plug cocks


Several parts of filters


Several replacement parts for fillers


Several weights and plugs


2 drag chains in steel


Several yeast plugs in bronze/brass


Several square wrenches in bronze/brass


Several hose connectors in bronze/brass


Several lids for pipes in bronze/brass


Several barrel filler valves as following:

Stock-no. Description Photo Weight Length Material
1 1 barrel filling valve old Photo 21 kg 1,27 m brass/iron
2 1 barrel filling valve old Photo 16,5 kg 0,96 m brass/iron
3 1 barrel filling valve old Photo 23 kg 1,20 m brass/iron
4 1 barrel filling valve old Photo 12,5 kg 1,17 m brass/iron
5 1 barrel filling valve old Photo 6 kg 1,18 m brass/iron
6 1 barrel filling valve old Photo 5,5 kg 1,05 m brass

Several parts from barrel filling valves as following:

Stock-no. Length total Weight Photo
1 69 cm 7,5 kg Foto 1 - 4
2 + 2a 120 cm 16,9 kg Foto 1 - 4
3 100 cm 5,7 kg Foto 1 - 4
4 105 cm 6,8 kg Foto 1 - 4
5 + 5a 108 cm 10,8 kg Foto 5 - 6
6 98 cm 7,7 kg Foto 5 - 6


1 CO2 overpressure valve brass/iron


1 copper vessel (for cooking caldron) with lid


1 wooden bucket with spout (with calibration stamp)


1 wooden vessel


8 false bottom segments in brass (for use in a conical bottom)

1 lid for false bottom segment (lid for spent grains removal) with screws, round, for decoration
(Sold!)


1 "Bierwörgel" (manual pump) with large handwheel in cast iron, free standing on
steel frame with 4 handles for carrying

1 Bierwörgel" (manual pump), free standing on steel frame


ca. 50 Brewery emblems or metal letter sign from Kronenbrauerei Dillenburg
in aluminium with yellow cord (original, not newly manufactured)


1 Malt inlet supply, bronze/copper, with copper pipe

1 Malt pusher/Malt inlet supply, bronze/copper


1 Capsule presser with foot in cast iron


2 air filters in copper


1 barrel pitch equipment


Overpressure armatures in bronze/brass

Click here for complete listing with photos


Severals "star wheels" in bronze/brass for old fillers

No. Diameter or length Weight Misc. Location
1 29 cm 10,1 kg Star Box 102
2 26 cm 7,2 kg Star Box 102
3 25 cm 8,0 kg Star Box 102
4 26 cm 8,2 kg Star Box 102
5 25 cm 9,5 kg Star Box 102
6 18 cm 4,3 kg Star Box 102
7 a + b 27 cm 4,5 kg Star Box 102
8 a + b 27 cm 2,6 kg Star Box 102
9 L = 62 cm 12,5 kg Worm Box 102
10 11 cm 1,7 kg Star Box 102
11 L = 28 cm 7,9 kg Middle piece Box 102

Lanterns and armatures with glass

No. Length total Weight Location
1 60 cm 10 kg Wooden shelf
2 40 cm 7,7 kg Wooden shelf
3 51 cm 10,9 kg Wooden shelf
4 32 cm 8,4 kg Wooden shelf
5 56 cm 16,4 kg Wooden shelf
6 27 cm 4,6 kg Wooden shelf
7 21 cm 2,1 kg Wooden shelf
8 26 cm 3,5 kg Wooden shelf

1 old wooden scale with different weights

1 old wooden scales without weights


3 miniature wooden barrels on bearing with wooden foot, for decoration


2 old pressure controlers make Hilge


2 interior lighting from brewing vessels


1 pump for water hydraulics for lifting and lowering of lauter tun rakes,
with separate height meter


1 Firing door with frame in cast iron


1 Sieve-ring without bottom in copper-brass


2 historical hand pumps in brass, frame in steel


1 Sample taker for mash/wort with spout and long handle


Other signs and decoration items for the wall as following:

no. item material shape size W x H photo
2 1 signs - inscription "Malzfabrik Mellrichstadt"
replica - thick material (ca. 2 mm)
enamel rectangle W = ca. 400 mm
H = ca. 250 mm
Click for photo
3 1 advertising sign for brewery anniversary
"150 Jahre Oberndorfer Bier 1827 - 1977"
aluminium cast rectangle W = ca. 350 mm
H = ca. 360 mm
thickness = ca. 15 mm
Click for photo

 


Back to decoration selection

Copyright © 2002 Albin Halbritter GmbH. All Rights Reserved.
Update: 10. März 2023