Armatures, valves, fittings, angle screens etc.
in stainless steel
There is a large amount of armatures and
fittings in stainless steel on stock, which we have collected in over 25 years
of work in the beverage industry. However, we cannot list all of them separately
because it would take too much time.
Please ask specifially if you need something.
Available are in the usual
sizes according to DIN norm: pipes, pipe fittings, reduction pieces, curves,
T-pieces, sample bocks, ball cocks, disk valves, reduction valves, check valves,
vessel armatures, safety armatures, domelid armatures, sprayheads, pneumatic
valves and much more. These armatures are mostly used and will be sold for a
fraction of the new prices.
You can find the following armatures on our
site (please click):
1.)
Disc valves and closeable cocks:
1a.) Discvalves
manual
in stainless steel in the sizes NW 25/32/40/50/65/80/100, all with cone/thread,
unused,
for very special and low prices - please ask for a price list via email or fax
-
V2A-disc valve DN 25 KM/G - please ask for price (weight
á ca. 1,5 kg)
-
V2A-disc valve DN 32 KM/G - please ask for price
-
V2A-disc valve DN 40 KM/G - please ask for price
-
V2A-disc valve DN 50 KM/G - please ask for price
(weight á ca. 2,6 kg)
-
V2A-disc valve DN 65 KM/G - please ask for
price
-
V2A-disc valve DN 80 KM/G - please ask for
price
-
V2A-disc valve DN 100 KM/G - please ask for price
A larger amount of unused disc valves is available on stock.
Please ask.
Click for photos
Stock of used APV/Rosista disc valves
(the availability has to be checked)
a.) manual version, complete with screw connections
2
items NW 25 KM/G
3 items NW 50
KM/G
1 item NW 65
KM/G
3 items NW 65
G/G
1 item NW 80
KM/G
2 items NW 80
G/G
1 item NW 100
KM/G
4 items NW 100
G/G
Photo
b.) manual version, complete with weld/screw
connections
2
items NW 25 S/KM
6 items NW 50 S/G
4 items NW 65 S/G
3 items NW 80 S/G
1 item NW 100 S/G
Photo
c.) manual version, complete with weld connections
1 item
NW 25 S/S
1 item NW 50
S/S
d.) manual flange version, complete with weld
connections
1 item
NW 25 S/S (Typ SVS 1F-25
H)
1 item NW 50 S/S (Typ SVS 1F-50
H)
3 items NW 65 S/S (Typ SVS 1F-65
H)
9 items NW 100 S/S (Typ SVS 1F-100 H)
Photo
e.) pneumatic flange version, complete with weld
connections
1 item
NW 50 S/S (Typ SVS 1F-50 FZ)
1 item NW 65 S/S (Typ SVS 1F-65 FZ)
Foto
1b.) Disc valves
pneumatic
1 item pneumatic double disc valve, unused
8 items disc valves (make unknown) with pneumatic rotary
drive in stainless steel,
opening by air, closing by spring
-
Available numbers: 4 items NW 25 G/S
2 items NW 40 KM/G
1 item NW 50 G/S
1 item NW 50 KM/S
-
Remark: supplies of the disc valves can be changed.
-
Misc.: prepared for report switch
-
Photo
4 items disc valves (make unknown) with pneumatic
rotary drive in stainless steel,
opening by air, closing by spring
-
Available numbers: 1 item NW 25 G/1/2"
1 item NW 25 G/G
1 item NW 50 G/G
1 item NW 80 G/G
-
Remark: supplies of the disc valves can be changed.
-
Misc.: prepared for report switch
-
Photo
11 items disc valves (several makes) with pneumatic rotary
drive in stainless steel,
partly opening by air, closing by spring, partly opening and closing by air
-
Available numbers: Pos. 1) 2 items NW 50 G/S
Pos. 2) 1 item NW 40 KM/G
Pos. 3) 1 item NW 40 KM/G
Pos. 4) 1 item NW 40 S/S (Make APV = "Klemmscheibenventil")
Pos. 5) 1 item NW 50 G/G
Pos. 6) 1 item NW 65 S/S
Pos. 7) 1 item NW 50 G/S (type PAMS-93/Gr. 0)
Pos. 8) 1 item NW 65 G/G
Pos. 9) 1 item NW 40 G/G
Pos. 10) 1 itemNW 65 KM/G (Make Handtmann)
-
Remark: supplies of the disc valves can be changed.
-
Misc.: partly prepared for report switch
-
Photo
9 items pneumatic rotary drives make Alfa-Laval, 3 of
them with disc valve,
opening by air, closing by spring
-
Available numbers: 3 items NW 40 S/S
6 items at the moment without disc valve (suitable for NW 40 etc.)
-
Operating pressure: 5 - 6 bar
-
Product-no.: 9611-99-1382
-
Cylinder type: LKLA-NC
-
Valve type: LKB
-
Misc.: with 2 report switches (micro switch)
-
Photo
7 items pneumatic rotary drive (make unknown - similar to
Kieselmann)
in stainless steel, opening by air, closing by spring
-
Available numbers: 7 items, at the moment without
disc valves (please ask for valves)
-
Size: hole distance middle-middle for 6 items = 48
mm / for 1 items = 66 mm
width of attachment for
disc valve = 20 mm
supply for
four-corner-connection from disc valve = 9,5 x 9,5 mm
-
Misc.: prepared for 2 report switches
-
Photo
7 items disc valves make Handtmann with pneumatic rotary
drive make Kinetrol, opening by air, closing by spring
6 items disc valves make Handtmann with pneumatic rotary
drive make Kinetrol, opening by air, closing by spring
1c.) Ball valves
and ball cocks manual
Several ball cocks and ball valves as visible on the photo
A. + AA.) 12 items VA ball cocks make Mecafrance (industrial
design)
-
Supplies: 2 1/4", possible with or without adapting
piece 2 1/4"
to DN 50 KM/G or G/G or also KM/KM
There are several adapting pieces in different designs and KM and G
available.
-
Free passage inside: ca. 35 mm
-
Weight without adapting pieces: á 3,45 kg
-
Weight with adapting pieces NW 50: á ca. 5,0 kg
-
Length without lever and without adapting pieces: 127 mm
-
Length with adapting pieces (as on photo): 215 mm
-
Photo
B.) 1 item VA ball cock make GEFA unused (industrial design)
-
Supplies: S/S - diam. inside 52 mm
-
Weld-on-pieces for norm thread KM or G DN 50 are available.
-
Free passage inside: ca. 50 mm
-
Weight: 4,4 kg
-
Length without lever: 144 mm
-
Photo
C.) 1 item VA ball cock make Mecafrance unused (industrial
design)
-
Supplies: S/S - diam. inside 50 mm
-
Weld-on-pieces for norm thread KM or G DN 50 are available.
-
Free passage inside: ca. 37 mm
-
Weight: 3,7 kg
-
Length without lever: 126 mm
-
Photo
D.) 1 item VA ball valve
E.) 1 item VA ball valve with aluminium lever
4 items ball cocks in stainless steel, unused (2 items
without handle)
-
Make: GEFA
-
Supplies: DN 65/65 S/S
-
Depth: 175 mm
-
Weight: á ca. 10 kg
-
Photo
11 items ball cocks in stainless steel, used
4 items ball cocks in stainless steel, unused
3 items ball cocks in stainless steel, used
1d.) Ball
valves pneumatic
4 items ball valves make Handtmann with pneumatic rotary
drive make Kinetrol,
opening and closing by air
1e.) One- and
Two-seat-valves
One- and two-seat-valves make Alfa-Laval, with pneumatic rotary
drive,
opening by air, closing by spring and opening and closing by air
-
Supplies: NW 50 - only as one-seat-valve
NW 65 - only as two-seat-valve (maybe adjustable into a one-seat-valve)
NW 100 - only as two-seat-valve
-
Pneumatic drive: partly spring-loaded, partly only
pneumatic
-
Photos
1f.) Angle valves
Angle valves: there are ca. 50 items on stock
Click here for further information
and photos
1g.) Check
valves / Multi angle valves / Miscellaneous
There is a larger number of different valves and armatures on
stock, please ask.
Click for example
photos
1h.) Zwickel
cocks / sample cocks
Zwickel cocks / sample cocks in stainless steel and brass
in different sizes
Click for photo
ca. 75 items sample cocks / zwickel cocks with hand lever
-
Supplies:
3/4" / NW 20 KM (or 3/4", when the cone is removed)
-
Passage:
width 15 mm
-
Material:
stainless steel / seat in brass
-
Click
for photo
ca. 12 items sample cocks / zwickel cocks without hand
lever,
for 3-corner-zwickel key
-
Supplies:
5/8" / NW 20 KM (or fine thread with diameter 14.5 mm, when the
cone is removed)
-
Passage:
width 5 mm
-
Material:
housing in stainless steel / conical inside part in brass
-
Click
for photo
1i.) Sample
cocks straight-through
Some sample cocks in the sizes of NW 10 / 15 / 20 / 25 / 32 /
40 / 50 and 65 are available. These cocks have mostly the supplies thread/thread.
They have partly also cone supply or milk thread to inch thread.
Please ask.
Click for example
photos
1j.)
Sample cocks three-way
Some sample cocks in the sizes of NW 25 / 32 / 40 / 50 and 65
are available. These cocks have mostly the supplies thread/thread. They have
partly also cone supply.
Please ask.
Click for example
photos
1k.) Membrane
regulation valves
Some membrane regulation valves in the sizes of NW 25 / 32 /
40 / 50 and 65 are available. These valves have mostly the supplies thread/thread.
They have partly also cone supply.
Please ask.
Click for
example photos
2.)
Angle valves
1.) Angle valves
Click for further information and photos
3.)
Tank armatures in stainless steel and brass
for different pressure ranges
|
Image |
Pressure at the moment |
Supplies sprayhead on top |
Supplies aeration on top |
Supplies CIP on top |
Supplies CIP
at bottom |
Supplies at bottom |
| Image 1 |
0.9 bar
or depending on the availability of safety valves |
NW 100 KM |
NW 40 KM |
NW 40 G |
NW 40 |
NW 25 G
disc valve |
| Image 2 |
0,9 bar
or depending on the availability of safety valves |
NW 100 KM |
NW 40 KM |
NW 40 G |
NW 40 |
NW 25 G
disc valve |
| Image 3 + 3a |
1,6 bar
or depending on the availability of safety valves |
NW 100 KM |
NW 40 KM |
NW 40 G |
NW 25 S |
NW 25 G
disc valve |
Click for photos
4.)
Form pieces (reduction pieces / curves / t-pieces / etc.)
4a.) Reduction
pieces
Remark: there is a larger number of reduction pieces in the
sizes of NW 25 - NW 100 on stock - partly also as reduction curves. These
reductions have different supplies like cone/thread, cone/cone or thread/thread,
and also different lengths. There are also other supplies like box or inch
thread and other thread types. Please ask.
4b.) Curves
Remark: there is a larger number of curves in the sizes of NW
25 - NW 100 on stock - partly also as reduction curves. These curves have
different supplies like cone/thread, cone/cone or thread/thread, and also
different lengths. There are also other supplies like box or inch thread and
other thread types. Please ask.
Click for example photos
4c.) T- and cross
pieces
Remark: there is a larger number of t-pieces in the sizes of
NW 25 - NW 100 on stock - partly also as reduction pieces. These t-pieces have
different supplies like cone/thread, cone/cone or thread/thread, and also
different lengths. There are also other supplies like box or inch thread and
other thread types. Please ask.
Click for example photo
Click for listing T-pieces
4d.) Fittings /
Coupling pieces
Remark: there is a larger number of fittings in the sizes of
NW 25 - NW 100 on stock. These fittings have different supplies like cone/thread,
cone/cone or thread/thread, and also different lengths. There are also other
supplies like box or inch thread and other thread types. Please ask.
Click for example
photos
5.)
Sight glasses in stainless steel in different sizes
(NW 25 - NW 100)
Click for photos
6.)
Vessel- and safety armatures
6a.)
Overpressure armatures
Remark: there are several overpressure armatures in different
supply sizes with different pressure adjustments on stock. Please ask.
Click for example
photo
Further pressure reduces and control valve can be found here.
6b.) Safety
valves spring-loaded
-
Manufacturer: mostly Handtmann
-
Supplies: mostly 1/2-inch-thread
-
Maximum pressure: different and written on the
valve (see photos)
|
Internal no. |
Pressure |
Supplies |
|
2 |
2,5 bar |
NW 25 KM |
| 3 |
2,0 bar |
NW 32 KM |
| 5 |
2,0 bar |
NW 40 KM |
| 7 |
2,0 bar |
NW 25 KM |
| 8 |
6,0 bar |
NW 25 KM |
| 9 |
1,5 bar |
1-Zoll-Nippel |
| 11 |
2,5 bar |
NW 25 KM |
| 12 |
1,5 bar |
1-Zoll-Nippel |
| 13 |
5,0 bar |
NW 25 KM |
| 14 |
2,0 bar |
NW 25 KM |
| 15 |
1 - 5 bar |
1/2-Zoll-Nippel |
| 16 |
1 - 5 bar |
1/2-Zoll-Nippel |
| 17 |
1 - 5 bar |
1/2-Zoll-Nippel |
| 18 |
1 - 5 bar |
1/2-Zoll-Nippel |
| 19 |
1 - 5 bar |
1/2-Zoll-Nippel |
| 20 |
1 - 5 bar |
1/2-Zoll-Nippel |
| 21 |
0,99 bar |
1 1/4-Zoll-Nippel |
| 28 |
0,8 bar |
NW 25 KM |
| 37 |
6,0 bar |
NW 25 KM |
| 41 |
3,5 bar |
NW 25 KM |
| 42 |
0,5 bar |
1/2" G |
| 43 |
1,0 bar |
1/2" G |
| 44 |
1,5 bar |
NW 25 KM |
| 45 |
3,0 bar |
NW 25 KM |
| 47 |
1,0 bar |
1/2" G |
| 48 |
2,0 bar |
1/2" G |
| 49 |
1,0 bar |
1/2" G |
| 51 |
0,9 bar |
1/2" G |
| 53 |
2,5 bar |
1/2" G |
| 54 |
2,0 bar |
NW 25 G |
| 56 |
1,0 bar |
1/2" G |
| 57 |
1,0 bar |
NW 25 KM |
| 58 |
2,0 bar |
NW 25 KM |
| 59 |
1,0 bar |
1/2" G |
| 60 |
1,0 bar |
1/2" G |
| 61 |
1 - 10 bar |
NW 50 G |
| 62 |
1- 10 bar |
NW 50 G |
| 63 |
1 - 10 bar |
NW 50 KM |
| 64 |
1 - 10 bar |
NW 50 KM |
| 65 |
1 - 7 bar |
NW 50 G |
| 66 |
1 - 8 bar |
NW 50 G |
| 67 |
1 - 5 bar |
NW 32 G |
| 68 |
1 - 7 bar |
NW 25 KM |
-
Photo with internal
numbers to this list (no. 1 - 37)
6c.) Safety valves spring-loaded with
vacuum valve
|
Internal no. |
Pressure |
Supplies pressure-side |
Supplies pressure relief |
Supplies CIP |
Remark |
|
TO1 |
without |
sprayhead NW 32 KM |
CIP tube
NW 25 G |
aeration
NW 25 KM |
dito |
|
TO2 |
without |
sprayhead NW 25 KM |
CIP tube
NW 32 G |
aeration
NW 25 KM |
dito |
-
Photo with internal
numbers to this list.
6d.) Safety valves spring-loaded with
vacuum valve
via counter-weight
|
Internal No. |
Pressure |
Adjustable
from/to |
Supplies |
|
1a |
0,99 bar |
0,99 bar |
NW 50 KM |
|
2a |
0,99 bar |
0,99 - 2,0 bar |
NW 50 KM |
|
3a |
0,99 bar |
0,99 - 2,0 bar |
NW 50 KM |
|
4a |
1,0 bar |
1,0 bar |
NW 50 KM |
|
5a |
2,0 bar |
up to 2,0 bar |
NW 50 KM |
|
6a |
0,99 bar |
0,99 bar |
NW 50 KM |
|
7a |
0,99 bar |
0,99 bar |
NW 50 KM |
|
8a |
2,0 bar |
up to 2,0 bar |
NW 50 KM |
|
9a |
0,99 bar |
0,99 bar |
NW 50 KM |
|
10a |
0,99 bar |
0,99 bar |
NW 50 KM |
|
11a |
0,99 bar |
0,99 bar |
NW 50 KM |
| 12a |
2,0 bar |
up to 2,0 bar |
NW 50 KM |
| 13a |
0,8 bar |
0,8 - 2,0 bar |
NW 50 KM |
| 14a |
0,2 bar |
0,2 - 0,99 bar |
NW 50 KM |
-
Photo with internal
numbers to this list
6e.) Safety angle valves spring-loaded
|
Internal no. |
Pressure |
Supply pressure-side |
Supply pressure-relief |
| 1e |
4,0 bar |
NW 40 KM |
NW 50 G |
| 2e |
0,2 bar |
NW 40 KM |
NW 50 G |
| 3e |
1,0 bar |
NW 40 KM |
NW 50 G |
| 4e |
4,0 bar |
NW 40 KM |
NW 50 G |
| 5e |
2,5 bar |
NW 40 KM |
NW 65 G |
| 6e |
2,5 bar |
NW 40 KM |
NW 65 G |
| 7e |
2,5 bar |
NW 40 KM |
NW 65 G |
| 8e |
2,5 bar |
NW 40 KM |
NW 65 G |
| 9e |
2,5 bar |
NW 40 KM |
NW 65 G |
| 10e |
2,5 bar |
NW 40 KM |
NW 65 G |
| 11e |
2,5 bar |
NW 40 KM |
NW 65 G |
| 12e |
2,5 bar |
NW 40 KM |
NW 65 G |
| 13e |
2,5 bar |
NW 40 KM |
NW 65 G |
| 14e |
1,0 bar |
NW 40 KM |
NW 50 G |
-
Photo with internal
numbers to this list.
6f.) Spring-loaded cylinder pneumatic
6g.) Bunging
apparatus
Remark: there are several bunging apparatus on stock.
You can find more information and photos here.
6h.) Tank spray
heads
1 rotating spray head unused
1 rotating tank spray head
1 tank spray head moveable
-
Marke: Diversey
-
Anschluß: NW 50
-
Photo
2 tank cleaning stations with manhole lid
- Remark: the station can be changed from tank to tank
- Misc.: please ask for more details.
- Photo
1 tank cleaning lid
-
previously used for
oval-shaped manhole: W = 455 mm / H = 355 mm
-
Supply: NW 40
-
Cleaning pipe: inside W = 0,53 m / H = 0,70 m
-
Photo
7.)
Check valves (plate and ball)
Remark: there is a larger number of spring-loaded check valves with plates
in the sizes of NW 25 - NW 100 on stock. There are also some ball-checkvalves
on stock. The check valves have mostly the supplies thread/thread.
Via fittings they can be also changed into cone/thread or cone/cone. Please
ask.
Click for example photo
8.)
Distribution stations for dispensing tanks
| Internal
no. |
distributors |
supply
size |
available
numbers |
| 1 |
4 x 5/8" G |
NW 40 KM |
4 items |
| 2 |
4 x 5/8" G |
NW 40 KM |
ca. 30 items |
4 |
4 x 5/8" G |
NW 40 KM |
2 items |
| 5 |
2 x 5/8" G |
NW 40 KM |
18 items |
| 6 |
10 x 5/8" G |
NW 40 KM |
3 items |
| 8 |
4 x 5/8" G |
NW 40 KM |
4 items |
| 10 |
2 x 5/8" G |
NW 40 KM |
1 item |
| 11 |
2 x 5/8" G |
NW 40 KM |
2 items |
| 12 |
2 x 5/8" G
(now reduced to 1" G) |
NW 40 KM |
1 item |
| 13 |
2 x 5/8" G |
NW 40 KM |
1 items |
| 14 |
4 x 5/8" G |
NW 40 KM |
1 item |
| 15 |
3 x 3/8" G |
NW 40 KM |
1 item |
| 16 |
6 x 5/8" G
(check valve missing) |
NW 50 KM |
1 item |
| 18 |
3 x 3/8" G |
NW 40 KM |
1 item |
| 19 |
4 x 3/8" G |
NW 40 KM |
1 item |
9.)
Distribution panels
Remark: there is a number of distribution panels on stock.
You can find more information and photos here.
10.)
Valve knots
1 valve knot
consisting of:
- 2 pneumatic 3-way-valves make Tuchenhagen, GEA and others, supplies NW
80
- 1 pneumatic disc valve NW 80
- supplies partly widened to NW 100
- Photos
1 valve knot
consisting of:
- 3 x 3-way-valves make Südmo NW 65
- 3 x 2-way-valves make Südmo NW 65
- 3 x double disc valve make Nocado NW 65
- Size WxDxH: 0,85 x 0,90 x 1,10 m
- Photos
Further valve knots make Tuchenhagen and others are on stock as
following:
|
Nr. |
Width mm |
Depth mm |
Height mm |
Weight kg |
NW |
Supplies |
Photos |
| V1 |
600 mm |
350 mm |
680 mm |
45 kg |
NW 65 |
5: G,G,S,KM,G |
Photo |
| V2 |
350 mm |
340 mm |
760 mm |
34 kg |
NW 65 |
4: G,G,G,KM |
Photo |
| V3 |
600 mm |
350 mm |
680 mm |
44 kg |
NW 65 |
5: G,G,S,KM,G |
Photo |
| V4 |
350 mm |
340 mm |
680 mm |
34 kg |
NW 65 |
4: G,G,G,KM |
Photo |
| V5 |
340 mm |
330 mm |
690 mm |
31 kg |
NW 65 |
4: G,G,G,KM |
Photo |
| V6 |
350 mm |
340 mm |
690 mm |
32 kg |
NW 65 |
4: G,G,G,KM |
Photo |
| V7 |
570 mm |
350 mm |
680 mm |
43 kg |
NW 65 |
5: G,G,S,KM,G |
Photo |
| V8 |
600 mm |
350 mm |
680 mm |
44 kg |
NW 65 |
5: G,G,S,KM,G |
Photo |
| V9 |
210 mm |
140 mm |
600 mm |
20 kg |
- |
substitute |
Photo |
11.)
Measuring equipment: thermometer, pressuremeter,
PH/CO2 meter
Click here for further information and photos
12.)
Manhole lids with or without "rings" for welding
There are several manhole lids in stainless steel and also in
aluminium available as following:
a.) 4 items manhole lids in stainless steel with ring for
welding
-
Size welding ring: inside 445 x 345 mm / outside
530 x 430 mm
-
Weight: from 13,9 to 15,0 kg
-
Photo
b.) 2 items manhole lids in stainless steel with
ring for welding
-
Size welding ring: inside 445 x 335 mm / outside
525 x 400 mm
-
Weight: from 15,3 to 16,6 kg
-
Photo
c.) 15 items manhole lids in stainless steel with
ring for welding
-
Size welding ring: inside 435 x 335 mm / outside
510 x 410 mm
-
Hight of rim: middle 400 mm / outside 55 mm
-
Weights: from 15,1 to 18,8 kg
-
Photos
d.) ca. 20 items manhole lids in stainless steel, with
aluminium brackets and brass screws
-
Form: oval-shaped
-
Size: L total = ca. 480 mm / W total = ca. 380 mm
-
Weight: each lid with brackets and screws ca. 9,1
kg.
-
Photos (example
photos)
e.) ca. 20 items manhole lids in stainless steel with
brackets and screws for
1.000-l DRU tanks, type 110M
13.)
Outlet armatures
ca. 4 items outlet armatures, prepared for Inliners (previously
from 1.000-l-dispensing tanks make DRU)
with our without screw attachment for tank
consisting of:
-
1.) Outlet diskvalve DN 40 G
-
2.) Pipe curve from DN 40 (diskvalve side) reduced to DN
32
-
3.) Infeed box in tank supply diam. outside = 43,5 mm
with cone nut reduced to diam. 37,0 mm for
inliner bag
plug-in depth of armature into the tank with seat
total 127 mm
height of thicker part of the plug-in tube in the
tank without cone and without seal 62 mm
-
Furthermore: 1 item screw attachment for
tank, suitable for this armature
diameter outside in Tank = 58 mm
Thread for outlet armature with thread for
DN32 cone nut and screw for DN 32 thread
-
Misc.: diskvalve is in the desing of make Fa.
K&H.
-
Photos
14.)
Aeration armatures
7 items aeration armatures for tanks and 4 sample cocks
15.)
Yeast plugs
Several yeast plugs for outlet DN 50 in stainless
steel
Several yeast plugs in bronze/brass
16.)
Lids for "Immervolltanks"
Copyright © 2002 Albin Halbritter GmbH. Alle Rechte vorbehalten.
Stand: 12. Mai 2023